UF Series

These machines are suitable for rotors between 0,5 and 100 kg measuring the unbalance at vertical axis. With the additional optional milling unit, the balance correction can be performed manually. The milling unit can move at horizontal or vertical axis. During milling operation, the angular movement of the rotor is performed by a manual turn table unit. The milling unit can be used as a drilling unit with the suitable tool.

  • Computerized
  • Innovative design
  • High balancing accuracy

OPTIONAL ACCESSORIES

  • Automatic Clamping (Manual / Pneumatic)
  • Protection Cage
  • Milling Unit
  • Swarf Extractor
  • Marking Unit

Photos

UF-50---ZX-45-(2)
UF-50---ZX-45-(1)
UF-50
özteknik-(7)
özteknik-(6)
özteknik-(5)
özteknik-(4)
20140214_093331
20140214_093155
20140214_093138
20140214_093121

Technical Information

TechnicialSpecifications                                                                          Unit

UF 50

UF 100

MotorPower                                                                           (kW)

1,5

7,5

Clamping

Collet - Fixture

Balancing

Static - Dynamic

Balancing Method

Drill-Mill

Turn Table

Standard On Milling Machines (ZX-45)

Swarf Extractor

Optional

Markalama / Marking

Optional

Protection Cage

Optional

RotorWeight                                                                           (Kg)

50 - 100

RotorDiameter                                                                           (mm)

100 - 700

BalancingRPM                                                                           (d/d)

1500

AirPressure                                                                           (bar)

6

SDM Series

These machines are suitable for rotors between 0,1 and 300 kg measuring the unbalance at vertical axis. With the additional optional drilling units, the balance correction can be performed manually. The drilling unit can be integrated at horizontal or vertical axis.

  • Computerized
  • Innovative design
  • High balancing accuracy

OPTIONAL ACCESSORIES

  • Automatic Clamping (Manual / Pneumatic)
  • Protection Cage
  • Drilling Unit (Vertical / Horizontal)
  • Swarf Extractor
  • Marking Unit

Photos

UF-50---ZX-45-(2)
SDM-50---SATMAK-MAKİNA-2.JPG
SDM-50---SATMAK-MAKİNA-1
SDM-50-(5)
SDM-50-(4)
SDM-50-(3)
SDM-50-(2)
SDM-50-(1)
ÖZKAN-DİKEY
MERKEZ-MAN
LEAX---BALTIX-(2)
DÖNMEZ-DEBRİYAJ-(5)
DÖNMEZ-DEBRİYAJ-(4)
DÖNMEZ-(3)

Technical Information

TechnicialSpecifications                                                                                      Unit

SDM 10

SDM 50

SDM 100

SDM 300

MotorPower                                                                                        (kW)

0,75

1,50

7,50

7,50

Clamping

Optional

Balancing

Static - Dynamic

Swarf Extractor

Optional

Marking

Optional

Protection Cage

Optional

Max.RotorWeight                                                                                        (Kg)

10

50

100

300

RotorDiameter                                                                                        (mm)

100-350

100-500

100-700

100-1000

BalancingRPM                                                                                        (d/d)

1500

AirPressure                                                                                        (bar)

6